modway EEI-4409 Manual

Armchair

EEI-4409 ARMCHAIR

Thank you for purchasing the MDOWAY ARMCHAIR.

Before you start, here are some helpful advice:

1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step

instructions.

2. Owing to the size and weight of the armchair, we recommend that it is assembled by two adults, on a

carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.

3. Please do not use any tools other than those provided or recommended in these instructions.

4. Please do not throw away any of the packaging or the instruction until you have checked all the components

and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe

and environmentally friendly way.

5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten

the components from time to time, so please save the tools that have been provided.

6. Please keep all pieces out of reach of children.

1. Armchair Body

Customer Service 609-256-9000︱www.modway.com

2. Front Leg

Bolt M8x25mm

Allen Wrench

Screw driver

* Not include hardware package

x12

Screw

3. Back Leg

Page 1 of 2

Table of Contents

Need help?

Do you have a question about the EEI-4409 and is the answer not in the manual?

Page 1 EEI-4409 ARMCHAIR Thank you for purchasing the MDOWAY ARMCHAIR. Before you start, here are some helpful advice: 1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 2. Owing to the size and weight of the armchair, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for.
Page 2 EEI-4409 ARMCHAIR STEP 1: 1. Please put Armchair Body (1) on a carpeted or padded surface. 2. Attach 1 piece of Front Leg (2) to the front of Armchair Body (1) by using 6 pieces of Bolts (A). Tighten Bolts (A) by using Allen Wrench (C) clockwise fully as shown in Figure 1.