Page 1
EEI-4449 SOFA Thank you for purchasing the MODWAY SOFA Before you start, here are some helpful advice: 1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 2. Owing to the size and weight of the sofa, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for.
Page 2
EEI-4449 SOFA STEP 1: 1. Please put Sofa Seat (1) upside down on a carpeted or padded surface. 2. Open the Zipper strip at the bottom of the Sofa Seat (1) as shown and take out the 4 pieces Legs (4), 1 piece of Support Leg (5), 5 pieces of Back Pillows (9), 2 pieces of Side Pillows (10) and Hardware bag.
Page 3
EEI-4449 SOFA STEP 3: 1. Put the assembled Sofa Seat (1), Left Armrest (2), and Right Armrest (3) on a carpeted or padded surface. 2. Tighten 4 pieces of Legs (4) to Left Armrest (2) and Right Armrest (3) clockwise as shown by hand.
Page 4
EEI-4449 SOFA STEP 5 1. Put Seat Cover (7) cover over the assembled Sofa Seat (1), Left Armrest (2), Right Armrest (3) and Sofa Back (6) as shown. 2. Pull Seat Cover (7) in line with the assembled Sofa Seat (1), Left Armrest (2), Right Armrest (3) and Sofa Back (6) by hand as shown, then fix the Seat Cover (7) by vercro as shown.
Page 5
EEI-4449 SOFA STEP 6 1. Open the compressed bag with scissors and take out 2 pieces of Seat Cushion (8) as shown with Figure 1. 2. Carefully put 2 pieces of Seat Cushions (8) to the assembled sofa. STEP 7 Carefully put 5 pieces of Back Pillows (9) and 2 pieces of Side Pillows (10) to the assembled sofa as shown.