Table of Contents
Advertisement
The response of both outputs from this crossover system are shown in the figure below.
AU D IO P R E C ISIO N
10.000
5.0000
0.0
-5.000
-10.00
-15.00
-20.00
-25.00
-30.00
20
Where the system under test shows a different result in a frequency response test using a +4dBu
input signal to the XLR connector with no DIP switches selected the source of the error can be
investigated by referring to the following sections.
OVERALL FREQUENCY RESPONSE
LEVEL(dBu)
2-CHAN(dBu)
&
100
FREQ (Hz)
Crossover Response
vs
1k
10k
29
50k
Advertisement
Table of Contents
