3.2 Programming the VoIP Gateway Card in the Los Angeles Office
3.2.3
Assigning the IP Address
When programming the VoIP Gateway Card for the first time, a new IP address must be assigned.
Once this is done and the card is on-line, it will be able to communicate with the other cards over the
VoIP network.
The specific setting values are based on the table under "IP Addressing Information" in "1.2.2
Numbering Plan Example".
Note
For more details about IP address assignment, refer to "2.2.1 Network Parameters" of the VoIP
Gateway Card Programming Guide.
28
Getting Started
1. Click 1.1 Network Settings, General in the main
menu.
2.
a.
In the IP Address box, type 200.45.11.35.
b.
In the Subnet Mask box, type 255.255.255.0.
c.
In the Default Gateway box, type 200.45.11.1.
d.
Click OK.
3. Confirm your entry, and then click OK.