Table of Contents
Advertisement
Indication
LINK
DATA
2.1.2
Installing the VoIP Gateway Card in the PBX
Install the VoIP Gateway Card in a free slot of the PBX.
1.
Insert the card along the guide rails.
2.
Holding the card as shown below, push the release lever in the direction of the arrow so that the
card engages securely with the connector on the back board.
Release Lever
Color
Link status indication
Green
•
ON: Normal connection
•
OFF: Connection error
Data transmission indication
Green
•
ON: Data transmitting
•
OFF: No data transmitted
Guide Rail
Description
Back Board
2.1 Installation
Getting Started
15
Advertisement
Table of Contents
