Panasonic KX-TDA0490 Getting Started page 40

3.3 Programming the VoIP Gateway Card in the Chicago Office
Note
For more details about uploading the address translation table, refer to "2.4.3 Upload of Address
Translation Table" of the VoIP Gateway Card Programming Guide.
Confirming the IP Address Assignment
Note that the card in the Chicago has been assigned a different IP address from the card in the Los
Angeles office.
1.
Set the IP address settings of the PC to the following values:
• IP address: 199.176.64.100
• Subnet Mask address: 255.255.255.0
2.
Start Internet Explorer from the Start menu.
3.
In the Address box of Internet Explorer, type http://199.176.64.41 (the new IP address of the
card).
4.
Press the ENTER key on the keyboard.
If you can log in, then the card has been successfully programmed.
After you have confirmed that the card has been successfully programmed, it is strongly
recommended that you download the configuration data from the card and save it on your PC for
backup and archive purposes.
The procedure for downloading the configuration data is provided in "2.4.2 Download of Configuration
Data" of the VoIP Gateway Card Programming Guide.
40 Getting Started
3. Click REBOOT.
4. Click REBOOT.