Bajaj pulsar DTS-i Service Station Manual page 177

SOP FOR FRONT FORK DUST SEAL & OIL SEAL REPLACEMENT
Pulsar 150/180 DTS-i
Service Station Manual
• Remove handle bar holder by removing 2 nos allen bolts with 6mm allen
key.
h[ º Dl bir hi[ Ã Drni b[ bi[ Ã Tn[ 6
• Insert fork inner pipe along with special tool in under bracket such that
special tool top portion touches to under bracket bottom edge.
• Tighten the fork upper bracket allen bolt by 6mm allen key.
mm Allen key
fi[ k < apr b\ [ k [ T n[ 6
• Remove outer tube by rotating special tool in clock wise direction
Ap[ S yl T& Ã sn[ kli[ k viez (dSimi> f[ r v) aiuTr Ty& b n[ bhir kiQi[ .
• Remove fork inner pipe from under bracket & take out the special tool as
shown in photograph.
aºDr b\ [ k Tmi> Y ) fi[ k < enr piepn[ fi[ T i[ g \ i fsmi jNiv[ l p\ m iN[ bhir kiQi[ .
173
mm Allen Key
Wiri Ki[ l i[ . fi
bi[ Ã T n[ TieT kri[ .
Dealer Development Center
Akurdi Pune