Vga Display Identification; Dvi Display Identification; Usb Support; Ddc /Ci Support And Smart Manage/Control - Philips 221P3LPEB/00 Service Manual

Meridian 3
78
Note 1:
a. D-SUB mode,
Normal node to Power saving mode: 15/s (typ.)
Power saving mode to Normal: 4/s (typ.)
b. DVI mode,
Normal node to Power saving mode: 15/s (typ.)
Power saving mode to Normal: 3.8s (typ.)
Note 2:
Measurement power saving.

3.8 VGA Display Identification

In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability

3.9 DVI Display Identification

In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0) use DDC-2B, DDC/CI, and
EDID V1.3

3.10 USB support

Connect the upstream port of the monitor to host PC's USB port via USB cable. Then attach external device
to the downstream port of the monitor. Check if the device can work properly.
3.11 DDC /CI Support and Smart Manage /Control
In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with Philips
SmartManage, SmartControl V6.1 and Portrait Display Tune at least.

3.12 Pivot Function (Auto Pivot)

It needs to support AUTO PIVOT function with Smart Control PC application tool.

3.13 Hot-key definition

3.14 Smart Contrast (Dynamic Contrast Ratio)

Smart Contrast is a kind of dynamic backlight control.
This function changes the panel backlight dynamically according to the frame brightness histogram.
At least the minimum contrast ratio has to be > 20,000,000:1 (typ.) (LED), 500,000 (LAMP)