Subscribe to Our Youtube Channel
Related Manuals for Philips 230V8
Summary of Contents for Philips 230V8
- Page 1 S line V line 230S8 230V8 www.philips.com/welcome EN User manual Customer care and warranty 16 Troubleshooting & FAQs...
-
Page 2: Table Of Contents
4. Technical Specifications ..12 4.1 Resolution & Preset Modes ..14 5. Power Management ....15 6. Customer care and warranty .. 16 6.1 Philips’ Flat Panel Monitors Pixel Defect Policy .....16 6.2 Customer Care & Warranty ..19 7. Troubleshooting & FAQs ..20 7.1 Troubleshooting ......20... -
Page 3: Important
• Please use approved power cord and production number of the product. provided by Philips all the time. If your power cord is missing, please contact with your local service 1.1 Safety precautions and center. (Please refer to Service... - Page 4 1. Important be better than a 15-minute break not expose the monitor to dust, every two hours. Try to keep your rain, water, or excessive moisture eyes from eye strain while using the environment. screen for a constant period of time •...
-
Page 5: Notational Descriptions
1. Important Warning 1.2 Notational Descriptions Failure to activate a screen saver, or The following subsections describe a periodic screen refresh application notational conventions used in this may result in severe “burn-in” or “after- document. image” or “ghost image” symptoms that will not disappear and cannot be Notes, Cautions and Warnings repaired. -
Page 6: Disposal Of Product And Packing Material
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back... -
Page 7: Setting Up The Monitor
Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. -
Page 8: Operating The Monitor
2. Setting up the monitor Connecting to your PC 2.2 Operating the monitor Description of the control buttons AC power input DVI input VGA input Kensington anti-theft lock Connect to PC 1. Connect the power cord to the back of the monitor firmly. 2. - Page 9 On-Screen Display. You can use On-Screen Display (OSD) is a feature this as a reference when you want to in all Philips LCD monitors. It allows an work your way around the different end user to adjust screen performance adjustments later on.
-
Page 10: Remove The Base Assembly For Vesa Mounting
2. Setting up the monitor Resolution notification 2.3 Remove the Base Assembly This monitor is designed for optimal for VESA Mounting performance at its native resolution, Before you start disassembling the 1920 × 1200 @ 60 Hz. When the monitor monitor base, please follow the is powered on at a different resolution, instructions below to avoid any possible... - Page 11 2. Setting up the monitor Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation. 100mm 100mm...
-
Page 12: Image Optimization
How does it work? dampens brightness to increase SmartImage is an exclusive, leading readability and reduce eye strain. edge Philips technology that analyzes This mode significantly enhances the content displayed on your screen. readability and productivity when Based on a scenario you select,... -
Page 13: Smartcontrast
Developed for wellbeing, content. SmartContrast dynamically Philips LowBlue Mode setting uses controls contrast and adjusts a smart software technology to backlighting for clear, crisp, bright reduce harmful shortwave blue gaming and video images or displays light. -
Page 14: Technical Specifications
4.Technical Specifications 4. Technical Specifications Picture/Display Monitor Panel Type IPS Technology Backlight W-LED Panel Size 22.5" W (57.2 cm) Pixel Pitch 0.254(H) mm x 0.248(V) mm Contrast Ratio (typ.) 1000:1 Optimum Resolution 1920 x 1200 @ 60 Hz Viewing Angle 178°... - Page 15 Packaging 100% recyclable Specific Substances 100% PVC BFR free housing Compliance and standards Regulatory Approvals CCC,CECP Cabinet Color Black Finish Texture Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
-
Page 16: Resolution & Preset Modes
4.Technical Specifications 4.1 Resolution & Preset Modes Maximum Resolution 1920 x 1200 @ 60 Hz (analog/digital input) Recommended Resolution 1920 x 1200 @ 60 Hz (digital input) H. freq Resolution V. freq (Hz) (kHz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00... -
Page 17: Power Management
5.Power Management 5. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. -
Page 18: Customer Care And Warranty
Pixel Defect Policy sub pixels together appear as a single white pixel. When all are dark, the three Philips strives to deliver the highest colored sub pixels together appear as a quality products. We use some single black pixel. Other combinations... - Page 19 Red + Green = Yellow of the same type that are near to one Green + Blue = Cyan (Light Blue) another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel).
- Page 20 In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
-
Page 21: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 22: Troubleshooting & Faqs
If the problem Note still persists after you have tried these The Auto Function is not applicable in solutions, contact Philips customer DVI-Digital mode as it is not necessary. service representative. Visible signs of smoke or sparks Common Problems •... - Page 23 Service contact information listed in images over an extended period Important information manual and may cause "burn in", also known as contact Philips customer service "after-imaging " or "ghost imaging", representative. on your screen. "Burn-in", "after- * Functionality different according to imaging", or "ghost imaging"...
-
Page 24: General Faqs
Shut down your computer, no pressure or force applied to disconnect your old monitor and the panel surface side. This may reconnect your Philips LCD monitor. affect your warranty conditions. • Turn on your monitor and then turn How should I clean the LCD on your PC. - Page 25 Failure to activate a screen saver, or any PC, workstation or Mac? a periodic screen refresh application Ans.: Yes. All Philips LCD monitors are may result in severe “burn-in” or “after- fully compatible with standard image” or “ghost image” symptoms PCs, Macs and workstations.
- Page 26 7.Troubleshooting & FAQs Q12: Why is my Display not showing sharp text, and is displaying jagged characters? Ans.: Your LCD monitor works best at its native resolution of 1920 x 1200 @ 60 Hz. For best display, please use this resolution. Q13: How to unlock/lock my hot key? Ans.: Please press...
- Page 27 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the 230V8 and is the answer not in the manual?
Questions and answers