Summary of Contents for Chauvet Professional Maverick Storm 1 Hybrid
Page 1
User Manual Model ID: MAVERICKSTORM1HYBRID...
Page 2
Edition Notes The Maverick Storm 1 Hybrid User Manual includes a description, safety precautions, installation, programming, operation and maintenance instructions for the Maverick Storm 1 Hybrid as of the release date of this edition. Trademarks Chauvet, Chauvet Professional, the Chauvet logo, Maverick, and Maverick Storm are registered trademarks or trademarks of Chauvet &...
Any reference to data or power connections in this manual assumes the use of Seetronic IP rated cables. The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol. Maverick Storm 1 Hybrid User Manual Rev. 1...
LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity. Maverick Storm 1 Hybrid User Manual Rev. 1...
• In the event of a serious operating problem, stop using immediately. If a Chauvet product requires service, contact Chauvet Technical Support. Maverick Storm 1 Hybrid User Manual Rev. 1...
0.9° to 23.7° in Beam mode and 1.1° to 36° in Spot mode. This hybrid houses a full arsenal of features: static and rotating gobo wheels, stackable independent prisms, animation wheel and a heavy frost to shift to a distinctive wash. The Maverick Storm 1 Hybrid works with DMX, Art-Net™, sACN, RDM and Lumenradio CRMX™.
10.78 in 10.78 in 274 mm 274 mm 20.59 in 523 mm 29.72 in 755 mm 21.42 in 544 mm 4.76 in 121 mm 15.27 in 9.88 in 388 mm 251 mm Maverick Storm 1 Hybrid User Manual Rev. 1...
3. Setup AC Power The Maverick Storm 1 Hybrid has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity. Procedure The Maverick Storm 1 Hybrid comes with 2 omega brackets to which the user can directly attach mounting clamps (sold separately). Make sure the clamps are capable of supporting the weight of this product. Use at least two mounting points per product.
DMX controller, download the DMX Primer from the Chauvet website: www.chauvetprofessional.com. DMX Linking The Maverick Storm 1 Hybrid can link to a DMX controller using a 5-pin DMX connection or a Lumenradio CRMX™ connection. For more information about DMX, read the DMX primer at: https:// www.chauvetprofessional.com/wp-content/uploads/2016/06/DMX_Primer.pdf.
Setup Lamp Replacement The Maverick Storm 1 Hybrid is equipped with an OSRAM SIRIUS HRI 420 W lamp. Follow the procedure below to safely change the lamp. Disconnect the product from power before performing this procedure. Procedure 1. Turn the product off and disconnect it from power. Wait at least 15 minutes for the lamp to cool down.
DO NOT touch the lamp without wearing gloves to avoid leaving grease on the bulb or on the contacts that could reduce the lamp’s life. • ALWAYS change the lamp when it has reached its recommended lifespan to avoid the risk of lamp explosion. Maverick Storm 1 Hybrid User Manual Rev. 1...
<RIGHT> Navigates rightwards through the menu list Battery Powered Display The Maverick Storm 1 Hybrid has a battery powered display which enables access to the menu when the product is powered off. Press and hold <MENU> until the display activates (approximately 15 seconds).
Operation Menu Map Refer to the Maverick Storm 1 Hybrid product page on www.chauvetprofessional.com for the latest menu map. Main Level Programming Levels Description Address 001–512 Sets the starting address Manual Manually set IP address IP Mode DHCP Network sets IP address...
Page 17
Reset to factory default settings Settings Auto Test Auto test all functions Pan Fine Tilt Test Manually control and test all settings Manual Test Tilt Fine 0–255 through the control panel P/T Speed Dimmer Dimmer Fine Maverick Storm 1 Hybrid User Manual Rev. 1...
Page 18
_ _ _w Voltage _ _ _V Shows electrical data Current _._A Gravity _ _ _ _ Shows product orientation Error _ _ _ _ _ Shows any errors, or No Error! Information Maverick Storm 1 Hybrid User Manual Rev. 1...
Page 19
Shows all current values from input 000–255 (cont.) Information signals Gobo Rotate Fine Animation Prism1 Prism1 Rotate Prism2 Prism2 Rotate Frost1 Beam Diffraction Focus Focus Fine Focus Auto Zoom Zoom Fine Special Function Maverick Storm 1 Hybrid User Manual Rev. 1...
Use control configurations to operate the product with a DMX, Art-Net™, or sACN controller. Control Mode The Maverick Storm 1 Hybrid works with wired DMX, Lumenradio CRMX™, Art-Net™, and sACN control signals. To select which protocol to use: 1. Go to the Settings main level.
028 029 Frost 030 031 Open 032 187 Color wheel indexing 188 219 Color scroll, fast to slow 220 223 Stop 224 255 Reverse color scroll, slow to fast Maverick Storm 1 Hybrid User Manual Rev. 1...
Page 22
120 123 Gobo 16 shaking, slow to fast 124 127 Open 128 189 Gobo scroll, fast to slow 190 193 Stop 194 255 Reverse gobo scroll, slow to fast Maverick Storm 1 Hybrid User Manual Rev. 1...
Page 23
190 193 Stop 194 255 Reverse prism rotation, slow to fast Frost 000 255 0–100% 000 003 No function Beam diffraction 004 255 0–100% Focus 000 255 0–100% Maverick Storm 1 Hybrid User Manual Rev. 1...
1. Go to the Settings main level. 2. Select the Backlight Timer option. 3. Select the length of the backlight timer, from 30S (30 seconds), 1M (1 minute), 5M (5 minutes), or ON (always on). Maverick Storm 1 Hybrid User Manual Rev. 1...
2. Select the Loss of Data option. 3. Select from Hold (holds last signal received) or Close (blacks out fixture). Lamp Settings To access the lamp settings of the Maverick Storm 1 Hybrid: 1. Go to the Setup main level. 2. Select the Lamp Settings option.
1. Connect the Maverick Storm 1 Hybrid products to receive the Presets by a DMX daisy chain. 2. Make the Maverick Storm 1 Hybrid with the Presets to transfer the first in the DMX daisy chain. 3. Power on all of the products.
3. Select NO (to cancel) or YES (to reset the product configuration). Test Mode Auto Test To have the Maverick Storm 1 Hybrid automatically test all functions one after the other: 1. Go to the Test main level. 2. Select the Auto Test option.
Operation Web Server The Maverick Storm 1 Hybrid Web Server can be accessed by any computer on the same network as the product. It allows network access to system information, settings such as control setup, manual testing of all functions, firmware updates, and the ability to change the Web Server password.
Allen Key screws head and arm covers: 25.5 Kgf.cm, 22.1 lgb.in Vacuum Test Measurements To ensure that the product has been reassembled correctly, use the IP Tester from Chauvet Professional to check the following data has the given measurements for the given method: •...
For warranty terms and conditions and return information, please visit our website. For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration. For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration. Maverick Storm 1 Hybrid User Manual Rev. 1...
Need help?
Do you have a question about the Maverick Storm 1 Hybrid and is the answer not in the manual?
Questions and answers