Table of Contents
Advertisement
IMI 66-064
If the system has been modified to provide LCD
speakerphone support, the system clock can be
programmed to maintain current date and time
information in the display. The clock information is not
displayed until the feature is programmed.
1. Press ITCM.
2. Dial * # 0 1.
3. Dial two digits (00-99) for yr.
A special system-wide list of numbers can be
programmed for automatic dialing by all users.
1. Press ITCM
2. Dial * # 0 2.
3. Dial 01 - 30 to chose storage location. Listen for
tone bursts.
4. Press specific line button or ITCM button to store
line or intercom preselection if desired (optional).
NOTE: When no line is preselected and the system
speed dial is used, the system will
The day, or normal, ringing of incoming lines can be
transferred to a particular station or stations (chosen
through class of service programming) for off-hour or
special-purpose answering. Additionally, stations can
be arranged through class of service programming, to
be able to answer any ringing outside line.
1. Press ITCM.
2. Dial * # 0 3.
Music that is provided to outside lines while they are
on hold can be disabled and enabled by attendant
action.
1. Press ITCM.
2. Dial *
#
0 4.
SECTION 2
ATTENDANT STATION OPERATION
SYSTEM CLOCK
SYSTEM SPEED DIAL PROGRAMMING
NIGHT TRANSFER (of ringing)
MUSIC ON HOLD
5-10
4. Dial two digits (01-12) for mo.
5. Dial two digits (01-31) for day.
6. Dial two digits (00-23) for hr.
7. Dial two digits (00-59) for min.
8. Dial one digit (1-7) for day of week (Sun.=1, Sat.=7)
9. Press MNTR (SPKR) to end.
automatically pick the prime line assigned to
the station (if enabled) or pick the most
previously used line at that station.
5. Dial the number to be stored (15 digits maximum).
•
Press HOLD to store pause (if required).
•
Press TAP to store flash (if required).
6. Press TRANS/CONF to save number.
7. Repeat steps 3 - 7 to store next number.
8. Press MNTR (SPKR) to end.
3. Press A1 (top, left-hand programmable button) to
toggle feature on or off. Associated light will turn on
when night transfer is active and turn off when it is
inactive.
4. Press MNTR (SPKR) to end.
NOTE: When this feature is on, the ITCM light will
flash.
3. Press A1 (top, left-hand programmable button) to
toggle feature on and off. Associated light will turn
on when music on hold is provided and turn off
when it is disabled.
4. Press MNTR (SPKR) to end.
System Description
Advertisement
Table of Contents
