Table of Contents
Advertisement
IMI 66-064
Attendant programming ican be performed by from
Station 10 at any time during system operation.
NIGHT TRANSFER
(of ringing)
The day, or normal, ringing of incoming lines can be
transferred to a particular station or stations by the
attendant for off-hour or special purpose answering.
1. Press ITCM * #.
2. Dial 03.
3. Press prog.button A1 to toggle feature on or off.
The light next to program key A1 wil turn on when
night transfer is active and ITCM light will flash.
4. Press * for next feature or press MNTR (SPKR) to
end.
MUSIC ON HOLD
Music is provided to outsinde lines that are placed on
hold if an external music source is connected to the
system. Music on hold can be disabled by attendant
action.
1. Press ITCM * #.
2. Dial 04.
3. Press prog.button A1 to toggle feature on or off.
The light next to program key A1 wil turn on when
night transfer is active and ITCM light will flash.
4. Press * for next feature or press MNTR (SPKR) to
end.
SYSTEM SPEED DIALING
A special system-wide list of numbers can be
programmed for automatic dialing by all users.
1. Press ITCM *#.
2. Dial 02.
3. Dial location (01 -30). Listen for tone bursts.
4. Press line button for preselect. (If desired).
NOTE: When no line is preselected and the system
speed dial is ued, the system will autmatically
pick the prime line assigned to the station (if
enabled) or pick the most previously used line
at that station.
SECTION 3
ATTENDANT PROGRAMMING
5. Dial number (up to 15 digits).
6. Press TRANS/CONF button for next location and
repeat procedure.
Press SPKR to end.
7. Press TRANS/CONF button, then press * for next
feature.
8 Press * for next feature or or press MNTR (SPKR)
to end.
LOC
01
02
03
04
05
06
07
08
09
10
If the system has been modified to provive LCD
speakerphone support, the system clock can be
programmed to maintain current date and time
information. The display will not show the date and
time until this feature is programmed as follows:
1. Press ITCM *#.
2. Dial 01.
3. Dial two digits (00-99) for year.
4. Dial two digits (01-12) for month.
5. Dial two digits (01-31) for day.
6. Dial two digits (00-23) for hour.
7. Dial two digits (00-59) for minute.
8. Dial one digit (1-7) for day of week.
9. Press * for next feature or press MNTR (SPKR) to
end.
4-18
-OR-
-OR-
NUMBER LOC NUMBER LOC NUMBER
11
12
13
14
15
16
17
18
19
20
SYSTEM CLOCK
SUN = 1, SAT = 7
System Description
21
22
23
24
25
26
27
28
29
30
Advertisement
Table of Contents
