System Description
SPEED DIALING
To dial station speed dial numbers,
•
Press keypad digit 0 - 9 for desired personal speed
dial number.
-OR-
If on line listening to dial tone,
•
Press HOLD and then press desired
keypad digit 0 - 9.
To dial system speed dial numbers,
•
Press S.
•
Press keypad digits 01 - 30 for desired system
speed dial number.
-OR-
If on line listening to dial tone,
•
Press HOLD S and then press desired
keypad digits 01 - 30.
AUTOMATIC DIALING
To automatically dial numbers,
•
Press desired programmable button.
•
If desired programmable button is also programmed
for DSS (one-button intercom) calling, press HOLD
and then press desired programmable button.
NOTE: Some telephone models provide an A16 button
as part of the A-field buttons. This A16 button
provides an automatic redial function as a fixed
feature. Operation of this fixed automatic redial
button is the same as that given for the
programmed automatic redial button.
AUTOMATIC REDIALING
To activate automatic redial,
•
Press programmable button pre-programmed for
that purpose.
•
Number will be dialed once a minute for ten
minutes.
If called number is busy,
•
Press automatic redial programmable button to
immediately start the redial cycle.
If call is answered,
•
Take control by lifting handset. If control is not
taken, call will drop.
To cancel automatic redial,
•
Press automatic redial button, lift and replace
handset, or press any station button.
NOTE: Any user-originated station activity during
automatic redial will cancel the feature.
LAST NUMBER REDIAL
The last number previously dialed can be
automatically redialed with one-button or two-button
action.
•
#
Dial
. (If on-line listening to dial tone, press HOLD
#
then dial
.)
•
Listen for ringing or busy tone.
- Ringing tone: When party answers, lift handset.
- Busy tone: Press MNTR (SPKR) to disconnect.
AUTO-SAVE
The last manually dialed number can be automatically
saved for later redial. As many numbers may be
saved as there are blank programmable buttons
available: however, the automatic saving of a number
where one is already saved will result in the
over-writing of the original saved number.
To auto-save a manually dialed number,
•
Lift handset or press MNTR (SPKR).
•
Press line select button (if idle line preference is not
enabled) to select line.
•
Dial number from keypad.
If you wish to save number,
•
Press desired programmable button to auto-save
number.
•
Hang up.
To dial an auto-save number,
•
Press line select button (if idle line preference is not
enabled) to select line.
•
Press auto-save button. Number is automatically
dialed.
5-3
IMI 66-064