Stihl FS 55 Instruction Manual page 11

Mowing Head with Nylon Line
Nylon line achieves a soft cut for edging
and trimming around trees, fence posts,
etc. – less risk of damaging tree bark.
The mowing head comes with an
instruction leaflet. Refill the mowing
head with nylon line as described in the
instruction leaflet.
WARNING
To reduce the risk of serious injury,
never use wire or metal-reinforced line in
place of the nylon line.
STIHL FixCut
Check the wear limit marks!
FS 55, FS 55 C, FS 55 R, FS 55 RC
If the raised moldings (1) on the
N
base of the attachment are worn as
shown in the illustration (above
right), do not continue using the
mowing head. Install a new one.
There is otherwise a risk of injury
from thrown parts of the head.
STIHL Polycut Mowing Head with
Polymer Blades
For mowing unobstructed edges of
meadows (without posts, fences, trees
or similar obstacles).
Check the wear limit marks!
If one of the wear limit marks on the
PolyCut mowing head is worn through
(arrow): Do not continue using the
mowing head. Install a new one. There
is otherwise a risk of injury from thrown
parts of the head.
It is important to follow the maintenance
instructions for the PolyCut mowing
head.
The PolyCut can also be equipped with
mowing line in place of the polymer
blades.
The mowing head comes with
instruction leaflets. Equip the mowing
head with polymers blades or nylon line
as described in the instruction leaflets.
WARNING
Never use wire in place of the nylon
mowing line – risk of injury.
Risk of Kickout (Blade Thrust) with Metal
Cutting Blades
When using grass cutting blades there is
a risk of kickout when the rotating blade
comes into contact with a solid object
like a tree trunk, branch, tree stump,
rock or similar. The machine is thrown to
the right or to the rear – opposite to the
blade's direction of rotation.
The risk of kickout is greatest when the
black area of the rotating blade comes
into contact with a solid object.
English
9