Tv Out Signal Set-Up - Concord Camera Eye-Q 3132z User Manual

Preparing to Take Pictures
Note: The default setting is "1 minute".
1 minute: This camera will automatically turn off if there is no activity after
3 minutes: This camera will automatically turn off if there is no activity after
5 minutes: This camera will automatically turn off if there is no activity
Off: This camera will not perform the power saving function. This setting is not
recommended as batteries are consumed more quickly in this setting.

TV Out Signal Set-Up

This camera can connect directly to a TV set. Please refer to Page 48 of
"Viewing images on a TV set." It allows you to use the TV screen as your cam-
era LCD screen when shooting or replaying images.
The Video output signal can be switched between NTSC or PAL to accom-
modate different signal systems. The default setting will vary between regions.
NTSC: U.S.A., Canada, Taiwan, Japan, etc.
PAL:
1. Turn the mode dial to SET (
2. Press the DOWN button (
one minute. Press the Power button to turn on the camera again.
three minutes. Press the Power button to turn on the
camera again.
after five minutes. Press the Power button to turn on the
camera again.
Europe, Asia (excluding Taiwan), etc.
( ) is highlighted.
).
) until the VIDEO SYSTEM icon
12