Blaupunkt HT6010 Instruction Manual page 8

HT6010
Operate the device only during the day or in good artificial
lighting.
Read the user manual.
General warning
Fire hazard
Electric shock hazard
Wear safety glasses
SYMBOLS
• The following symbols may appear in the operating instructions or on the tool's nameplate.
• These signs contain important information about the product and instructions on how to use it.
Intended use:
The garden tool is intended for home use for trimming and
cutting hedges and decorative shrubs in gardens. Do not use the trimmer for cutting branches with the
thickness of more than 20 mm.
Before starting the device:
1. The cutting elements should always be free of dirt. Clean the blades after each use.
2. Clean blades correctly interoperate with each other and reduce the risk of jamming on the cut
plants.
3. Keep the cutting element away from the body and the power cord when cutting. The device can
easily cut off fingers or cut objects which gen in between the blades.
4. Do not remove jammed material while the blades are operating. Before removing the jammed
material, make sure that the device cannot be accidentally turned on. Although the device is fitted
with a safety device against accidental start-up, there is always a risk of turning it on. Therefore, it is
necessary to take an additional precaution in the form of removing the plug from the socket.
Use ear protection
Wear protective gloves
Wear protective clothing
Wear a protective mask
Wear respiratory protection
6