Table of Contents
Advertisement
TAKING PICTURES AND VIDEOS CLIPS
TAKING PICTURES AND VIDEOS CLIPS
TAKING PICTURES
1. Power on the camera.
2. Slide the Function switch to
Note: In picture taking mode, the
lower left side of the LCD. If this icon is not shown, press the
button repeatedly until the
3. Frame your subject with the LCD or viewfinder.
4. Hold the camera still and press the Shutter button to take the
picture.
•
The
and
icon will be shown briefly on the LCD after the Shutter button is pressed, which
indicates that the camera is saving the picture. Do not power the camera off or remove the
batteries before the picture is saved.
Note: If Quick View function is turned on(See 'Customizing Your Camera Settings'), the LCD will
show the image just taken and the options of:
Save: Press the Enter button to save the image.
Delete: Press the
If no action is taken, the picture will be saved in 15 seconds or so.
TAKING PICTURES IN MARCO MODE
This mode enables the camera to take pictures in close distances.
1. Slide the Macro Switch to
2. Frame the subject in the LCD.
• The best shooting range is between 40 cm to 50 cm (15.76 in. – 19.89
inches.)
3. Press the Shutter button to take the picture.
Important:
1. When Macro shooting is not needed, remember to slide the Macro Switch back to Landscape
(
) mode. Otherwise your pictures taken with shooting range go beyond 50 cm might be
blurry.
2. Do Not use Flash when taking pictures in Macro Mode.
(Capture mode).
icon will be shown on the
icon is shown.
button to select "delete" and then press the Enter button to delete the image.
position.
11
3
1
2
Macro Switch
Advertisement
Table of Contents
