Table of Contents
Advertisement
ADSP-Z16 IV-12A Panels
1
2
5
6
7
8
9
10
1. Coaxial digital input
2. Speaker level input plug for OEM
hookup
3. 8-Channel RCA inputs
4. 4-Channel RCA outputs
5. Comm Port for HD-BT module
6. Optical digital input
7. Protection LED
8. Dash remote port
12
14
3
11
9. Power LED
10. USB connector for PC control
11. Variable gain controls with clip indicators
12. Speaker output connectors for Ch 1, 2, 3,
4, 5, 7
13. Speaker output connectors for Ch 6, 8, 9,
10, 11, 12
14. Remote Out
15. Auto Turn-On
16. Power/Rem/Gnd terminals
13
14
15
16
4
1. Switch to the previous song (Bluetooth)
2. Switch to the next song (Bluetooth)
3. Mode switching
4. Source switching
The M-AT1 is a special microphone for setting up the sound automatically, based on
the response characteristics of the speakers and auto detail detection of the car. After
detecting all the necessary information, the audio information screen will be transmitted
to the computer.
1. Connect the microphone to the dedicated port of the unit.
2. The microphone must be fixed on the headrest of the driving position. This position is
basically the same as the head of the driver.
Remote Control
1
2
3
4
5. Volume knob. Long press for 5 seconds
enter the switching mode between main
volume or subwoofer. Short press the mute
The Microphone for Auto Tuning
(optional for DSP-Z8 IV AT and ADSP-Z8 IV-6AT)
5
15
Advertisement
Table of Contents
