Table of Contents
Advertisement
INSTALLING DIRECTX 9 – WINDOWS 2000
Step 1
Make sure your camera is powered off and not connected to the computer.
Step 2
Make sure the computer is powered on and Windows is running.
Step 3
Close any other applications or software you may be running.
Step 4
Insert the CD-ROM included in your camera's packaging into your computer's
CD-ROM Drive.
NOTE: If the installer does not start automatically within 30 seconds after the
CD-ROM has been inserted, click on "My Computer" either on the Desktop
or in the Start Menu and locate the CD-ROM Drive. Double click on the CD-
ROM Drive icon for installation.
Step 5
Select the language. Click [OK].
Step 6
The installation screen will appear.
Click on Install Microsoft DirectX 9.0.
Step 7
The next screen will begin the DirectX setup.
Click [Next >].
Step 8
Click [Next >].
Step 9
Click [Finish].
Your computer will automatically reboot.
34
INSTALLATION GUIDE
Advertisement
Table of Contents
