SKUTCH CK-1R4 Manual

"Telecommunication Products to solve Telecommunication Problems"
CK-1R4
Promotion-On-Hold Module
(For RCA 25260 phone)

Introduction

Thank you for purchasing the Skutch CK-1R4
Promotion-On-Hold Module. The CK-1R4 is a
true plug and play device. The unit does not
require any "Learning" to operate. When a call is
placed ON HOLD from the base or any one of
the cordless desk sets or cordless phones, the
caller will hear the music on hold audio. When
the line is re-answered, the music on hold audio
automatically stops. It's that simple!
It should be noted that the 25260 telephones BEEP
every 10 seconds when placed ON HOLD. This is a
function of the telephone, NOT the CK-1R4. This
BEEP can NOT be disabled. The BEEP will be heard
along with the music on hold audio.

Installation

1- Position the CK-1R4 Silver box behind the base
telephone with the jacks facing towards the back of
the phone.
2- Disconnect the modular cord from the back of your
phone at the jack labeled [LINE 1 + 2], and connect it
to the silver box jack labeled, [1&2 Line].
Music On Hold, Messages On Hold, Commercials On Hold by TelephoneOnHold.com
9/9/13
Silver Box
Flat Cable
Sensor Board
Power
Cube
Audio
Cable
with
Adapter
Telephone Cord