Download Print this page

Advertisement

Quick Links

STIHL HS 82
{
Instruction Manual
Manual de instrucciones
WARNING
Read Instruction Manual thoroughly
before use and follow all safety
precautions – improper use can
cause serious or fatal injury.
ADVERTENCIA
Antes de usar la máquina lea y siga
todas las precauciones de
seguridad dadas en el manual de
instrucciones – el uso incorrecto
puede causar lesiones graves o
mortales.

Advertisement

loading

Summary of Contents for Stihl HS 82

  • Page 1 STIHL HS 82 Instruction Manual Manual de instrucciones WARNING Read Instruction Manual thoroughly before use and follow all safety precautions – improper use can cause serious or fatal injury. ADVERTENCIA Antes de usar la máquina lea y siga todas las precauciones de seguridad dadas en el manual de instrucciones –...
  • Page 2 Instruction Manual 1 - 35 Manual de instrucciones 36 - 74...
  • Page 3: Table Of Contents

    For further information you can Adjusting the Carburetor go to www.stihlusa.com. Spark Arresting Screen in Muffler Contact your STIHL dealer or the STIHL Spark Plug distributor for your area if you do not understand any of the instructions in this Lubricating the Gearbox manual.
  • Page 4: Guide To Using This Manual

    NOTICE Filler hole for gear Have your STIHL dealer show you how Indicates a risk of property damage, lubricant to operate your power tool. Observe all including damage to the machine or its...
  • Page 5 Maintain a firm grip at all times, but – Prolonged use of a power tool (or other warnings apply to the use of all STIHL do not squeeze the handles with machines) exposing the operator to hedge trimmers. Different models may constant, excessive pressure.
  • Page 6 Although certain work gloves (e.g. made of operating this tool. unauthorized attachments are useable leather or other wear with STIHL power tools, their use may, resistant material) when Proper Clothing in fact, be extremely dangerous. handling the machine and the cutting tool.
  • Page 7 Never remove the fuel Your STIHL power tool uses an oil- spilled fuel has been filler cap while the engine is running. gasoline mixture for fuel (see the wiped away.
  • Page 8 See also the "Fueling" chapter in your Instruction Manual for additional information. Before Starting To do this with this STIHL cap, raise the WARNING grip on the top of the cap until it is upright Always check your power tool for proper at a 90°...
  • Page 9 WARNING STIHL recommends that you always To reduce the risk of injury from loss of spray the cutter blades with STIHL resin control, do not attempt to "drop start" solvent before starting work – with the your power tool.
  • Page 10 Be extremely cautious when switch to 0 or STOP. If the vegetation being cut or the working on slopes or uneven ground. surrounding ground is coated with a chemical substance (such as an active HS 82 R, HS 82 T...
  • Page 11 (e.g. the trunk of a felled come to a complete standstill. cause blades to crack, chip or break. tree) away from any combustible STIHL does not recommend the use of Check condition and tightness, look – substances.
  • Page 12 A the emission control devices and loose connection between spark plug systems may be performed by any terminal and the ignition wire connector nonroad engine repair establishment or HS 82 R, HS 82 T...
  • Page 13: Using The Unit

    An improperly maintained muffler will Store the power tool in a dry and high or The HS 82 R is designed for cutting increase the risk of fire and hearing loss. locked location out of reach of children.
  • Page 14 Any working position above head height is tiring. To minimize the risk of accidents, work in such positions for short periods only. HS 82 R, HS 82 T...
  • Page 15: Fuel

    To ensure the maximum performance of (carburetor diaphragms, oil seals, fuel water cooled and air cooled engines your STIHL engine, use a high quality 2- lines, etc.), but magnesium castings and (e.g., outboard motors, snowmobiles, cycle engine oil. To help your engine run catalytic converters as well.
  • Page 16: Fueling

    Markings on filler cap and housing must build-up in the tank to release slowly. align. HS 82 R, HS 82 T...
  • Page 17 Base of filler cap is in the cor- Flip the handle down. rect position – interior Push the filler cap down as far as it marking is below the clip. It will go. does not align with the exte- rior marking. HS 82 R, HS 82 T...
  • Page 18: Rear Handle

    Set the choke lever (5) to g if the engine is cold e for warm start – also use this posi- tion if the engine has been running but is still cold. HS 82 R, HS 82 T...
  • Page 19 Hold the starter grip with your right Set choke lever to e– even if the hand. engine is cold. Now start the engine with a few brisk pulls of the starter rope. HS 82 R, HS 82 T...
  • Page 20: Cleaning The Air Filter

    Fit the filter in the filter housing. out on the palm of your hand or blow it out with compressed air. Do not wash. Install the filter element. Fit the filter cover. Insert screw and tighten it down firmly. HS 82 R, HS 82 T...