Table of Contents
Advertisement
How to replace the external fan,
Procedure,
continued,
continued
18
Step
17
Fasten the cable with a cable binder
18
Fasten the fan suspension with four new screws with glue.
Important: Fasten with 1.5 Nm
19
Remount the two plugs for the controller
20
Remount the front cover
21
Remount the controller
22
Connect power
The test program runs through all functions.
Make sure the unit does not come out with an alarm signal.
In case of an alarm signal, please see please see "Preventive maintenance"
on page 12.
continued
Action
Advertisement
Table of Contents
