Download Print this page

Panasonic KX-TGP600 Supplement For Administrator Manual page 5

Sip cordless phone
Hide thumbs Also See for KX-TGP600:

Advertisement

KX-TGP600 Software File Version 10.050 or later
1. Add the Value Range
(1) 5.3.23 SIP-TLS Settings
SIP_TLS_VERIFY_n
(Before)
Value Range
(After)
Value Range
2. Change the descriptions
(1) 5.3.27 SRTP Settings
DISPLAY_SRTP_CALL_ENABLE 
(Before)
Description
(After)
Description
(Page. 317)
• 0: No verification
• 1: Simple verification
• 2: Precise verification
• 0: No verification
• 1: Simple verification
• 2: Precise verification
・3: Precise verification with CN check.
(Page 326)
Selects whether an icon is displayed when the unit is using encrypted call mode (SRTP).
Note
• If you enable displaying the encrypted call mode icon during SRTP calls, it is recommended that you set
"SIP_TRANSPORT_n="2"" to encrypt the SIP packets using TLS encryption.
• If "SIP_DNSSRV_ENA_NAPTR_n" is set to "Y", using SIP TLS for NAPTR is recommended.
Selects whether an icon is displayed when the unit is using encrypted call mode (SRTP).
Note
• If you enable displaying the encrypted call mode icon during SRTP calls, it is recommended that you set
as below:
(1) Set "DISPLAY_SECURITY_CALL_ENABLE" to "Y".
To set the "TLS" condition for displaying the privacy icon during a conversation over SRTP.
(2) Set "SIP_TRANSPORT_n" to "2".
To send by TLS transport layer protocol.
(3) Set "SIP_TLS_VERIFY_n" to "3".
To do precise verification with CN check.
• If "SIP_DNSSRV_ENA_NAPTR_n" is set to "Y", using SIP TLS for NAPTR is recommended.

Advertisement

loading