Panasonic KX-TGP600 Supplement For Administrator Manual page 3

KX-TGP600 Software File Version 10.100 or later
1. Add the settings
1.1 Add the configuration parameters
(1) 5.3.22 SIP Settings
NAPTR_WITH_OUTPROXY_ENABLE_n
Value Format
Description
Value Range
Default Value
SIP_TRANSPORT_NAPTR_ENABLE_n
Value Format
Description
Value Range
Default Value
SRTP_CONNECT_MODE_NAPTR_ENABLE_n
Value Format
Description
Value Range
Default Value
BOOLEAN
Specifies whether to enable sending NAPTR even when Outbound Proxy Server Address or
SIP_OUTPROXY_ADDR_n is set.
・Y: Enable
・N: Disable
Note
• This setting is available only when "SIP_DNSSRV_ENA_NAPTR_n" is set to "Y".
N
BOOLEAN
Specifies whether to enable to select the protocol (UDT,TCP or TLS) for SIP by the NAPTR response.
At the same time specifies whether to enable to select the secure protocol (SIPS or TLS) for SIP by the NAPTR
response.
・Y: Enable
・N: Disable
Note
If "Y" is specified, the following settings will be invalid.
-Web User Interface Programming
Transport Protocol, TLS Mode
-Configuration File Programming
SIP_TRANSPORT_n, SIP_TLS_MODE_n
N
BOOLEAN
Specifies whether to enable to select the type of RTP (RTP or SRTP) by the NAPTR response.
・Y: Enable
・N: Disable
Note
If "Y" is specified, the following settings will be invalid.
-Web User Interface Programming
SRTP Mode
-Configuration File Programming
SRTP_CONNECT_MODE_n
N