Check Before Driving - KYMCO K-Lite FE User Manual

=Driving
Mode (B): (Motor is engaged).
Push the disengage lever down to put it back to the drive mode.
Always switch the scooter off to push it.
Do not push the scooter too fast. If a pre-set speed is exceeded while you
are pushing the scooter, the drive motor will switch on an automatic
braking system, which slows the scooter's push speed. After any
adjustments, repair or service and before use, make sure all hardware is
tightened securely - otherwise injury or damage may result.
VI. CHECK BEFORE DRIVING:
Ensure your scooter is in
drive mode (not in "freewheel"
mode)
Seat is locked into the desirable
position
Is the battery charged?
Is the brake working?
Are the tires and wheels
undamaged?
Check the "freewheel" mode
lever is in the pushed down
position
Move the seat forwards and
backwards to ensure it is
stationary.
Check the control panel to verify
the charging status of the battery
Check by driving slowly and
stopping again
Visual check of tires and wheels
34