Troubleshooting; Overload Protection; Error Code - KYMCO K-Lite FE User Manual

IX.

TROUBLESHOOTING

It is possible to resolve some simple errors / faults yourself !
Some simple checks:
1. Check whether the position of power switch is correct or not?
2. Is the battery fully charged? (Refer to "battery and charging")
3. Is the battery and battery socket properly installed and locked in?
4. Is the disengage drive lever in the "drive" position?
OVERLOAD PROTECTION
When the scooter attempts to climb over a high obstacle (such as a
curb) or a steep slope, the overload protection can trip turn off the
power supply, when the motor is overloaded.
Phenomenon:
The scooter slows down in an obvious fashion, and then stops. Control
system turns off.
How to troubleshoot this problem:
1. Turn off the scooter and let it cool down for a few minutes.
2. Turn on the scooter, reverse from the obstacle and then avoid the
obstacle.
ERROR CODE
If the above phenomenon still cannot be eliminated, or the LED
indicator on the right side of the control panel keeps flashing, please
contact your approved service provider for assistance.
Status indicator
flashing code
indicator
44