Table of Contents
Advertisement
5
Strobe Check
Tools:
Power Supply (Topward: DC Power Supply set to 5V)
18% Grey Chart (44 cm x 37cm) See Attachment "A"
Camera Positioning Fixture
Smart Media card with Calibration Code
Procedure:
1.
Install Smart Media card with Calibration Code into camera.
2.
Place camera into the positioning fixture. Positioning Fixture slides right to left at Preset Detents to
the 3 m targets.
3.
Attach camera to power supply. Point camera at the 3 m Focus target.
4.
Turn on camera
5.
Select Item 4 with Mode dial.
6.
Press shutter to run Strobe cal.
7.
If Color LCD display "** OK **", Camera Passes Record Data to Traveler Sheet and Pass to next
station. If Color LCD display "** Error **", Camera Fails, record failure code and submit to Failur
Analysis
6
Video Signal /Calibration (NTSC and PAL)
Tools:
Vector Scope, Wave form monitor.
Smart Media card with Sierra Imaging Provided Calibration Code
Power Supply (Topward: DC Power Supply set to 5V)
TV Monitor (NTSC)
Procedure:
1.
Place camera into the positioning fixture.
2.
Attach camera to power supply.
3.
Install Smart Media card with Calibration Code into camera.
4.
Turn on camera
5.
Select item 6 with mode dial.
– 11 –
Advertisement
Table of Contents
