Table of Contents
Advertisement
5) Smart Media card with Calibration Code
Procedure:
1.
Install Smart Media card with Calibration Code into camera.
2.
Place camera into the positioning fixture. Positioning Fixture slides right to left at Preset Detents to hit
the 3 m targets.
3.
Attach camera to power supply. Point camera at the 3 m Focus target.
4.
Turn on camera
5.
Select Item 3 with Mode dial.
6.
Press shutter to run Far focus calibration
7.
If Color LCD display "** OK **", Camera Passes Record Data to Traveler Sheet and Pass to next
station. If Color LCD display "** Error **", Camera Fails, record failure code and submit to Failure
Analysis
3-Meter Grid Patterns on Far Wall
– 10 –
Advertisement
Table of Contents
