Table of Contents
Advertisement
3
Near Focus Verification
Tools:
DNP Light Box
Power Supply (AC adaptor 5V)
Camera Positioning Fixture
40 cm Focus Target attached to light box
Smart Media card with Calibration Code
Procedure:
1.
Install Smart Media card with Calibration Code into camera.
2.
Place camera into the positioning fixture. Positioning Fixture slides right to left at Preset Detents to hit
the 40cm targets.
3.
Attach camera to power supply. Point camera at the 40cm Focus target.
4.
Turn on camera
5.
Select Item 2 with Mode dial. (Rec mode)
6.
Press shutter to run Near focus calibration.
7.
If Color LCD display "** OK **", Camera Passes Record Data to Traveler Sheet and Pass to next stati
If Color LCD display "** Error **", Camera Fails, record failure code and submit to Failure Analysis.
4
Far Focus Verification
Tools:
1) DNP Light Box
2) Power Supply (AC adaptor 5V)
3) Camera Positioning Fixture
4) 3-Meter Focus Target
* paste chart1(farchart1.pds) and chart2(farchat2.pds) like following.
– 9 –
Advertisement
Table of Contents
