EasyRobotics ER5 User Manual page 6

Mounting the teach pendant
Reattach the pillar cover.
Guide the teach pendant up
through the tabletop.
The UR robot is mounted at
a 45 degree angle.
Revised: 2018-02-19
EasyRobotics ApS
Place the teach pendant on its bracket and refit the
tabletop. Put the excess cable down through the tabletop
opening.
On the UR Installation tab
under Robot Mounting and
Angle you have to change the
Rotation to 180 degrees and
the Tilt to 45 degrees.
ER5 Original user manual (en) Version A04
Side 6 af 10