Top View - Lenovo ThinkSystem SR630 V3 System Configuration Manual

VGA connector
The VGA connectors on the front and rear of the server can be used to attach a high-performance monitor, a
direct-drive monitor, or other devices that use a VGA connector.
XClarity Controller network connector
The XClarity Controller network connector can be used to attach an Ethernet cable to manage the baseboard
management controller (BMC).
Rear LEDs
• For more information about the LEDs on the XCC system management port, see "LEDs on the XCC
system management port" in User Guide.
• For more information about the system error LED and system ID LED, see "LEDs on the system board
assembly" in User Guide.
• For more information about the LEDs on the power supply unit, see "LEDs on the power supply unit" in
User Guide.

Top view

This section contains information on the top view of the server.
The following illustrations show the top views of the server without any air baffle or rear cage installed.
• "Top view of 2.5-inch drive configuration" on page 32
• "Top view of a server with the liquid assisted cooling module installed" on page 33
.
Chapter 2 Server components
31