Basic Operation Of The Setup Menu - Panasonic WJ-RT416 Installation Manual

Basic operation of the setup menu

Screenshot 1
Display the setup menu by pressing the SETUP button.
Setup Menu
System Setup
Recording Setup
Event Setup
Display Setup
Camera Control Setup
Communication Setup
User Management
Maintenance
Screenshot 2
The submenu of the selected setup item will be displayed.
(Example: When "Recording Setup" is selected)
Recording Setup
Common Setup
Manual Rec. Setup
Timer Rec. Setup
Screenshot 3
The setup window of the selected submenu will be dis-
played.
(Example: When "Common Setup" is selected)
Common Setup
Power On Manual Rec.
Overwrite
Audio Select
Advanced Setup
OK
52
Off
On
Set
Set→
Cancel
Step 1
Press the [SET] button after selecting the desired setup
item using the arrows button (C or D).
Step 2
Press the [SET] button after selecting the desired submenu
using the arrows button (C or D).
Step 3
Configure each setting on the setup window.
To select the setup item: Move the cursor onto the
desired setup item using the arrows button (CDAB).
To change the parameter, to move the cursor on the
setup window: Press the [SKIP s] or [SKIP d] button.
To enter a number: Press the camera selection buttons.
To go back to the previous page: Press the [ESC] button.
Step 4
To save the settings, move the cursor onto "OK" and press
the [SET] button.
To cancel the edited settings, move the cursor onto
"Cancel" and press the [SET] button.