I System Setup (System Setup) - Panasonic WJ-HD220 Operating Instructions Manual

G Camera Title (CAMERA TITLE)
Camera title and display position are specified for each
camera.
CAMERA TITLE
CAM TITLE
1 OFF
2 ON→ 2••••
3 ON→ 3••••
4 OFF
5 OFF
6 OFF
7 OFF
8 OFF
1. In the DISPLAY SETUP menu, move the cursor to CAM-
ERA TITLEO, and press the JogDial to open the CAM-
ERA TITLE menu.
2. Move the cursor to the camera you wish to program
using the [D] or [C] button.
3. Select either ON or OFF with the JogDial.
The default is ON for all cameras.
ON: Enables camera title display, title registration, and
position selection.
OFF: Disables the camera title functions.
4. Press the JogDial (SET) to validate the selection.
When ON is selected, go to the following steps. The
cursor moves to the title edit area.
When OFF is selected, return to step 2 above, or press
the [SETUP/ESC] button to escape from the CAMERA
TITLE menu.
5. <Editing>
5-1 Select a character for the digit with the JogDial.
Each title is identical to the camera number: 1, 2, 3,
and so forth as the default.
Available characters are as follows.
0 ~ 9 A ~ Z ! % &
( ) * – / : . ?
← → ↑ ↓ •
5-2 Press the JogDial to validate the selection for the
digit.
The selected character is displayed on the digit,
and the cursor goes to the right digit.
5-3 Press the [C] button to move the cursor back to the
previous digit.
5-4 Repeat steps 5-1, 5-2 and 5-3 until all digits are
entered.
5-5 Press the JogDial when the cursor is on the right
end digit to validate the entered title. The cursor
moves to the POSI. column.
POSI.
R-LOWER
L-LOWER
Note: A bullet (centered dot) stands for a space used
for deleting entered characters.
6. Select a display position with the JogDial.
The default setting for cameras 1, 2, 5, and 6 is R-
LOWER, for cameras 3, 4, 7, and 8 R-UPPER.
R-LOWER: Displays the camera title in the lower right
corner.
R-UPPER: Displays the camera title in the upper right
corner.
L-LOWER: Displays the camera title in the lower left
corner.
L-UPPER: Displays the camera title in the upper left
corner.
Note: When the 9-split screen is displayed, the camera title
position is fixed to R-LOWER.
7. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.

I System Setup (SYSTEM SETUP)

There are two pages of the system setup. To turn a new
page, continue to move the cursor with the [D] or [C] but-
ton.
SYSTEM SETUP (1 OF 2)
PASSWORD LOCK
ALL→
OPERATION→
KEYLOCK BUZZ
SKIP ALM-RECALL
SIMUL REC&PLAY
ALTER DETECT
DISK END MODE
DISK END BUZZ
SYSTEM SETUP (2 OF 2)
PLAY PRIORITY
TIME ADJUST SETUP
AUTO ERASING
RESOLUTION→
HDD SAFETY MODE OFF
OFF
*****
*****
ON
1PAGE
ON
OFF
CONTINUE
ON
LOCAL
O
OFF
NORMAL→
31