I Time & Date Search Playback; I Multiscreen Playback - Panasonic WJ-HD220 Operating Instructions Manual

4. Press the [PLAY] button to play back the searched
record.
5. Press the [STOP] button to stop playback.
Note: "Alarm Search Playback" and "Alarm Log Recall"
are similar, but different in operations. Refer to
I Alarm Log Recall & Search on page 49.
I Time & Date Search Playback
A picture record of a specified time and date is played
back.
5
PLAY REC
TIME&DATE
2
JAN31.04
TO SEARCH PUSH PLAY KEY
1. Press the [TIME&DATE SEARCH] button. The monitor
displays the time & date search window.
2. Press the [D] or [C] button to move the cursor to the
next position.
3. Rotate the JogDial clockwise to increase the parameter
or counter-clockwise to decrease it.
4. Repeat steps 2 and 3 above until the desired parame-
ters are selected.
5. Press the [PLAY] button to start playback. The monitor
displays the single spot image when an input is select-
ed or the nine-split image when all input is specified.
The recorder stops searching when the playback
reaches the end of the record.
PUSH— PAUSE
SET
REC STOP
SEARCH
ALARM
RECALL
1 3
23:00:00
6. Repeat from step 1 to search for another time and date
or press the [TIME&DATE SEARCH] button to cancel
the function. Pressing the [STOP] button will also end
the searching.
Note: Searching may take the recorder 18 seconds at
worst

I Multiscreen Playback

You can view a multiple playback image displayed in 4-split
or 9-split pattern on the monitor at a time.
HDD
SETUP
/ESC
FULL
MULTI SCREEN
SELECT
ERROR
ZOOM
• Normal Playback
Press the [PLAY] button to start normal playback. The
image data recorded on the disk are sequentially
played back, and the monitor displays images in the
single display mode or multiscreen display mode.
• Multiscreen Playback
Press the [MULTI SCREEN SELECT] button an appro-
priate number of times. The monitor display changes as
follows. The LEDs in the [MULTI SCREEN SELECT] but-
ton and respective input buttons will light up.
Single Image → Quad A (4A/comprising inputs 1, 2, 3,
and 4) → Quad B (4B/inputs 5, 6, 7, and 8) → Nine-spit
(inputs 1 - 8) → Quad A → Quad B → Nine-split
• Specific Input Playback
Press the respective input button. The images of the
selected input are played back continuously and dis-
played on the monitor.
• Stop Playback
Press the [STOP] button to stop playback.
Note: When the playback proceeds to where recording
is executed on the disk, the recorder will pause
playback and freeze the displayed image on the
monitor.
STOP PLAY REC
ALARM
SERCH
PLAY MODE SELECT
53