Panasonic WJ-HD220 Operating Instructions Manual page 35

Notes:
• The number of days includes today as 1 day, there-
fore 2DAYS covers today and yesterday.
• Auto erasing is implemented at 24:00 midnight.
Playback will stop once when the time reaches
24:00, then will restart with a different portion based
on the renewed day count.
G Resolution (RESOLUTION)
Notes:
• We recommend that you perform this setup before
starting to operate the system. Changing the resolution
is an irrevocable procedure that results in the erasure of
all data previously recorded.
• When a new resolution is selected, the screen MAIN
MENU changes to a camera image. The recorder then
reboots with the new resolution applied.
1. Move the cursor to RESOLUTION and press the
JogDIal.
2. A password prompt is displayed. Enter a registered
password using CAM SEL buttons 1-8.
SYSTEM SETUP (2 OF 2)
/
-
PASSWORD
3. If the correct password is entered, the prompt screen
returns to the previous menu and resolution selection
becomes possible.
4. Rotate the JogDial to select a resolution and press the
JogDial.
The default is NORMAL.
NORMAL: Normal resolution
SIF: Source Image Format (lower than NORMAL)
5. Confirmation prompt is displayed.
SYSTEM SETUP (2 OF 2)
********WARNING*********
ALL OF THE DATA
IN THE DISK
IS GOING TO BE ERASED.
-
ERASE?
-----
NO
6. If you do not need to change the resolution, press the
[SETUP/ESC] button. The menu will return to step 1
above.
7. If you intend to change it, rotate the JogDial to select
YES and press the JogDial.
The recorded data will be erased while "NOW ERAS-
ING" is displayed for a few seconds.
35