I Mounting In The Rack - Panasonic WJ-HD220 Operating Instructions Manual

6. Assemble the optional HDD unit onto the bracket using
the absorbers, sleeves, earth lug, and screws provided
with the recorder.

I Mounting in the Rack

1. Remove the four rubber feet by removing the five
screws on the bottom of the unit.
2. Place the rack mounting brackets on both sides of the
unit and tighten with the six supplied screws (M3 x10).
Fix the rack mounting brackets.
12
A V
S D
N o .
S E
R
Remove 5 rubber feet.
Six screws (Supplied)
7. Place the HDD unit on the chassis, and fix it with six
screws.
8. Reinstall the fan cord and connector.
9. Connect the power cable and flat cable on the rear of
the HDD unit.
10. Fix the top cover to the recorder with nine screws.
3. Install the unit with the rack mounting brackets in the
rack by using four screws (not included).
Rack