Table of Contents
Advertisement
4.
Use the Paper Supply ARROW buttons to select one of the following:
Auto
You cannot use the Auto Paper Supply feature with the Auto %
Reduce/Enlarge option. You must select a specific reduce/enlarge
percentage. Information on the Reduce/Enlarge feature is provided at the
beginning of this chapter.
Tray 1
Tray 2
Tray 3
If paper is not loaded in the Paper Tray, the message "ADD PAPER TO
TRAY X" is displayed on the Copier Screen, where "X" is the selected tray.
For information on loading the paper tray, go to the "Loading Paper In the
Paper Trays" procedure in the "Setting Up the DP-C106" in Installation
Instructions.
5.
Select your desired number of copies using the Numeric Keypad.
6.
Press the Start button.
Using the Bypass Tray
Use the Bypass Tray to copy onto unconventional paper sizes or weights,
such as postcards, transparencies or envelopes.
Loading the Bypass Tray
Use the following procedure to load the Bypass Tray:
1.
Lower the Bypass Tray.
0302500 W O L
Copy Features
25
Advertisement
Table of Contents
