Table of Contents
Advertisement
Scanner Error Codes
Scanner Error Codes
An Error Code may indicate that an electrical or mechanical problem exists in
the Scanner. Typical error codes, xx digit numbers, are followed by the words
CALL FOR SERVICE.
If an error code should appear on the Scanner Control Panel perform the
following steps:
1.
Write down the code number.
2.
Switch Off the Scanner power switch.
3.
Wait 20 seconds.
4.
Switch On the Scanner power switch.
If the problem is resolved, resume printing or copying.
If the problem is not resolved, call your Authorized Panasonic
Representative and report the Error Code.
Problem Solving
107
Advertisement
Table of Contents
