Loading Postcards Into The Bypass Tray - Panasonic WORKIO DP-C106 Operating Instructions Manual

Loading Postcards into the Bypass Tray

Postcards must be fed through the Bypass Tray.
When printing on the back of pre-printed postcards, make sure that the
postcard is not bent. To avoid paper jams, flatten every bend by hand before
printing.
Use the following procedure to load postcards into the Bypass Tray:
1. Load a postcard into the Bypass Tray with the copy side face up.
2. Adjust the Paper Guides to fit snuggly against the postcard stack.
Use the Reduce/Enlarge feature to copy larger images onto a postcard.
Copy Features
0302507A- W O L
29