Error Codes (For Copier) - Panasonic DP-3510 Service Manual

4.5.

Error Codes (For Copier)

The self-diagnostic functions detect troubles in the important components of the copier.
When any trouble occurs, the copier stops.
4.5.1. User Error Codes (U Code)
Note:
Uxx and a message will appear on the Panel Display.
Code
U0 Key Counter
U1 Close Front Cover
U4 Close Finisher
U6 Close Right Cover
U7 Close Right Cover Lower
(System Console)
U9 Close Left Cover
U12 Close Finisher Staple Cover
/ Upper Cover
U13 Add Toner
Ver. 5.2
User Error Codes (U Code) Table
Item
1. Card Key is not installed.
2. Key Counter Harness is disconnected.
3. Department Code is not assigned.
1. Front Cover is open.
2. Front Cover Sensor is disconnected.
3. Front Cover Sensor is defective
4. LVPS connector is disconnected.
5. LVPS is defective.
6. SPC PCB connector is disconnected.
7. SPC PCB is defective.
1. Finisher is open.
2. Paper is in the output bin.
3. Stapler is empty.
4. LVPS connector is disconnected.
5. LVPS is defective.
6. SPC PCB connector is disconnected.
7. SPC PCB is defective.
1. Right Cover is open.
2. Right Cover Sensor is disconnected.
3. Right Cover Sensor is defective.
4. LVPS connector is disconnected.
5. LVPS is defective.
6. SPC PCB connector is disconnected.
7. SPC PCB is defective.
1. Right Cover is open.
2. Right Cover Sensor is disconnected.
3. Right Cover Sensor is defective.
4. LVPS connector is disconnected.
5. LVPS is defective.
6. SPC PCB connector is disconnected.
7. SPC PCB is defective.
1. Left Cover is open.
2. Left Cover Sensor is disconnected.
3. Left Cover Sensor is defective.
1. Close Finisher Staple Cover.
2. Finisher Staple Cover Sensor is disconnected.
3. Finisher Staple Cover Sensor is defective.
1. Toner Bottle is incorrectly installed.
2. Low Toner.
3. Toner Sensor is disconnected.
4. Toner Sensor is defective.
5. SPC PCB connector is disconnected.
6. SPC PCB is defective.
176
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Check Points
JAN 2006