Icom IC-SAT100M Network Setting Manual page 9

Connecting the VE-PG4 Connecting the VE-PG4
D Connecting to the IP Network
4. In [Transceiver Connection], enter the Transceiver A (IC-SAT100M) settings to Destination Address,
Destination Port Number, and Control Port Number. Then click <Apply>.
5. In [Transceiver Connection], click <Connect>.
• Connection Status changes to "Connecting."
6. Do the same way in the steps 2 to 5, enter the Transceiver B (IC-SAT100M) settings.
1 Enter
1 Click
2 Confirm
2 Click
9