Folder Naming Conventions; Performing Incremental Copies - Seagate Lyve Mobile Shuttle User Manual

MM
UUID
N
Take for example the following directory:
20201001.1306.XFGT6G.1
Lyve Mobile Shuttle would have created this directory on October 1, 2020, at 1:06pm. The source of the
content was a device with a UUID of XFGT6G. This was the first upload of content from this device on this
day.
Folder naming conven ons
When viewing your copied files in Lyve Mobile Shuttle > Backups, folder names created during
incremental copies are appended with _update. Folder names from copies that were interrupted are
appended with _incomplete.
Backup
type
Full
Incremental
Incomplete

Performing incremental copies

When a new storage device is detected, Lyve Mobile Shuttle will copy all files from the source. If the same
drive is connected again at a later date, Lyve Mobile Shuttle will perform either a full or incremental copy,
depending on your copy settings.
Full
Copy Storage Devices
Minutes
Universally unique identifier designating the device from
which the files were copied
Session number
Sample folder name
20200401_1120_Garmin_VirbUltra30_878555
20200401_1120_Garmin_VirbUltra30_878555_update
20200401_1120_Garmin_VirbUltra30_878555_incomplete
All files on the storage device are copied,
regardless of whether some or even all files on
the device were copied previously.
4/4/23 21