Configure Sites - Seagate Lyve Mobile Shuttle User Manual

Configure sites
Some of the sites you connect to may require static IP addresses rather than Dynamic Host Configuration
Protocol (DHCP). Lyve Mobile Shuttle walks you through adding network information for sites using static
IP addresses. Once a site is configured, you can
Home screen.
To add a site:
1. On the Network screen, tap Configure Sites.
2. Tap Add site.
3. Follow the onscreen prompts to create the following:
Site name
Fixed IP address
Subnet mask
Router address
Hostname
4. Tap Create to complete the site configuration.
To edit an existing site:
1. On the Network screen, tap Configure Sites.
2. Tap on the name of an existing site.
3. Follow the onscreen prompts to revise data.
4. Tap Create to complete the site configuration.
Set creden als (Volume password)
Add an extra layer of security by creating a username and password to access the Lyve Mobile Shuttle
volume on the network. This is only available with SMB as the service and cannot be used with NFS. The
default name of the volume is Lyve Mobile Shuttle.
To add or edit credentials:
1. On the Network screen, tap Set Credentials .
2. The device password is required to edit network credentials for Lyve Mobile Shuttle's volume. Enter
the device password and tap Next.
3. Tap on the Username field and then use the keyboard to enter a username.
4. Tap on the Password field and use the keyboard to enter a password.
5. Tap Create.
6. Review the newly created credentials on the Network Credentials screen. You can also edit or delete
the volume credentials on this screen.
Network
choose it when selecting a network connection from the
4/4/23 17