FAX ONLY
(all calls are received as faxes)
Activating FAX ONLY mode
1
Set feature #77 to "FAX ONLY" (p. 55).
If the arrow ( ) is not shown on the right of
2
the display, turn it on by pressing
AUTO ANSWER
The display will show the number of rings
before the unit answers a call in FAX ONLY
mode.
Display:
If you wish to change the ring count setting,
3
press
or
is displayed, and press
When receiving calls, the unit will
automatically answer all calls and only
receive fax documents.
Note:
If the arrow ( ) is already shown on the right of the display and you wish to change the ring count, turn
the arrow off once then on again by pressing
This mode should not be used with a telephone line which is used for both phone calls and faxes. Fax
communication will be attempted even if someone is trying to call you.
If you have a telephone line just for faxes, we recommend the following setup.
Example: One telephone line is used for phone calls and a separate telephone line for faxes.
Only a fax machine is connected.
mode!
.
PICKUP & RCV FAX
AFTER 3 RINGS[±]
until the desired number
.
SET
Receiving Faxes
ON
and follow the instructions in step 3.
AUTO ANSWER
Line 1 – Phone calls
Line 2 – Faxes
Display
SET
AUTO ANSWER
39