Fax Only Mode (All Calls Are Received As Faxes) - Panasonic KX-FP80 Operating Instructions Manual

KX-FP80 (036-039) 00.2.21
FAX ONLY
(all calls are received as faxes)
Activating the FAX ONLY mode
If the arrow ( ) is not shown on the right of the
display, turn it on by pressing
The display will show the current number of rings
in the FAX ONLY mode.
Display:
If you wish to change the number of rings, rotate
JOG DIAL until the desired ring count is
displayed and press
The unit will automatically answer all calls and
only receive fax documents.
Note:
If the arrow is already shown on the right of the display and you wish to change the ring count, turn the
arrow off once then on again by pressing
This mode should not be used with a telephone line which is used for both voice and fax calls. Fax
communication will be attempted even if someone is trying to call you.
If you have a telephone line just for faxes, we recommend the following setup.
Example: One telephone line is used for voice calls and a separate telephone line for faxes.
9:45 AM Page 39
mode!
AUTO ANSWER
PICKUP & RCV FAX
AFTER 3 RINGS
.
SET
AUTO ANSWER
Only a fax machine is connected.
Receiving Faxes
.
Display
JOG DIAL
ON
AUTO ANSWER
and follow the instructions above.
Line 1 – Voice calls
Line 2 – Fax calls
SET
39