Table of Contents
Advertisement
For replacement only
5
Remove the stoppers and tags from the new
ink film. Find the "T" shaped gear (blue).
Insert the blue core of the front ink film roll
6
into the right slot of the unit (
"T" shaped gear (blue) into the left slot of
the unit (
2
).
Insert the rear ink film roll (
Turn the "T" shaped gear (blue) in the
7
direction of the arrow.
Make sure that the ink film is
wrapped around the blue core
at least once.
Correct
The ink film is not wrapped
Tight
around the blue core.
Blue core
8
Close the back cover securely by pushing
down on the dotted area at both ends (
Close the front cover securely (
The following message will be displayed
while the unit is checking that there is no
slack in the ink film.
Display:
Note:
The ink film is completely safe to touch, and will not
rub off on your hands like carbon paper.
1
). Insert the
3
).
Incorrect
Reverse
Slack
2
).
PLEASE WAIT
For fax advantage assistance, call 1-800-435-7329.
Stopper
New ink film
"T" shaped gear (blue)
"T" shaped
gear (blue)
2
Left
slot
Front ink
film roll
"T" shaped gear
(blue)
Ink film
).
1
2
Front cover
Display
Setup
Tags
Stopper
Rear ink film roll
Right
3
slot
1
Blue core
Dotted area
1
Back cover
11
Hide quick links:
Advertisement
Table of Contents
