Snmp Control - NXT Power VANGUARD THREE-PHASE 10-40 KVA UPS SNMP Manual

7.3

SNMP Control

This page lets the Administrator enable or disable the communication protocols
available in the SNMP card, or alternatively configure the communication protocol
with a different port number.
 BootP/DHCP
This is the parameter enabling or disabling the Boot Protocol (BootP) /
Dynamic Host Configuration Protocol (DHCP) process. These protocols are
used to obtain a dynamic IP address from a BootP / DHCP server.
 PING Echo
Enable/Disable the SNMP card to respond to Ping requests.
Network Upgrade

This is the parameter enabling or disabling the Trivial File Transfer Protocol
(TFTP) upgrade control. You can use the provided upgrade utility on Windows
via TFTP to upgrade the SNMP card firmware.
 HTTP Security
If this setting was enabled, user has to enter user name and password when
he/she access to SNMP card.
 SSH Connection
Enable/Disable the SSH connection with the SNMP card. The user may
configure SSH protocol to use a port number other than standard SSH port
(22).
 SNMP Support
Enable/Disable the SNMP connection with the SNMP card. The user may
configure the SNMP protocol to use a port number other than the standard
SNMP port (161).
 SMTP Support
Enable/Disable the SMTP connection with the SNMP card. The user may
configure the SMTP protocol to use a port number other than the standard
SMTP port (25).
 UPnP Control
Enable/Disable the Universal Plug and Play (UPnP) feature with the SNMP
card.
20