Komatsu WB140-2N Operation & Maintenance Manual page 51

18. Start Bypass Danger
Jump starting the machine from outside the operator's cab.
• Never bypass the starting circuit by jump starting your
machine at the starter or any other point outside of the
operator's cab.
• Always start the machine from the operating position in
the operator's cab with the seat belt fastened around your
waist.
19. Loader Dangers
Before doing any maintenance on the front part of the machine
and the bucket, loader equipment must be raised:
• Empty the bucket completely.
• Raise the loader and install the safety bar.
• Slowly lower the loader cylinder until all movement stops.
• Lock the loader controls.
WB140-2N, WB150-2N
SAFETY
1-29