Remark
•
When fuel sulphur content is less than 0.5%, change oil in the oil pan every periodic maintenance hours described in this
manual. Change oil according to the following table if fuel sulphur content is above 0.5%.
•
When starting the engine in an atmospheric temperature of lower than 0°C (32°F), be sure to use engine oil of SAE1OW,
SAE2OW-20 and SAE10W-30, even though an atmospheric temperature goes up to 10°C (18°F) more or less in the day
time.
•
Use API classification CD as engine oil and if API classification CC, reduce the engine oil change interval to half.
•
There is no problem if single grade oil is mixed with multigrade oil (SAE10W-30, 10W-40), but be sure to add single
grade oil that matches the temperature in the table.
•
Use Komatsu genuine oil which has been specifically formulated and approved for use in the engine, hydraulic work
equipment, transmission, axles, and brakes.
Specified capacity: Total amount of oil including oil for components and oil in piping.
Refill capacity: Amount of oil needed to refill system during normal inspection and maintenance.
ASTM:
American Society of Testing and Material
SAE:
Society of Automotive Engineers
API:
American Petroleum Institute
No.
Supplier
1
KOMATSU
2
AMOCO
3
ARCO
4
BP
5
CALTEX
6
CASTROL
7
CHEVRON
WB140-2N, WB150-2N
Fuel sulphur content
0.5 to 1.0%
Above 1.0%
Engine Oil
API CD, CE, or CF-4
Premium multi grade
Engine Oils PM701 SAE
10W-30
SAE 15W/40
Amoco 300
SAE 15W/40
Arcofleat S3 Plus SAE
15W-40
Hy-Vis HD extra S3
plus SAE 15W/40
Vanellus C3
SAE 15W-40
Vanellus C3 Extra
SAE 15W-40
RPM Delo 500
RPM Delo 600
RPM Delo SPH
Turbomax RX super
RPM Delo 400
RPM Delo 500
Change interval of oil in engine
oil pan
1/2 of regular interval
1/4 of regular interval
Transmission Oil GM
Grease LI, EP, MoS
Dexron II C4 Allison
C4
Komatsu PM704
(1902) Dexron® III
Dexron II ATF
ATF Dexron II
Autran MBX
ATF-HD
TQ - Dexron II
Supreme Automatic
Transmission Fluid
MAINTENANCE
Anti-freeze Coolant
2
(Permanent type)
Komatsu Super
Grease NLGI 2
PM706
ASTM D 128
Molylith grease 2
Ready Antifreeze
Litholine HEP 2
(-40
Grease LTX2-M
(-40
AF eng. coolant
Molytex EP2
CX eng. coolant
Spheerol LMM
Anti-freeze (pure)
Moly grease
----
Sincol-Blu
°
°
C / -40
F)
Sigil Fluid
°
°
C / -40
F)
Flurant
3-9