Halted: Reverse Hoses; Halted: Shift To Neutral; Filter Change Due; Total Filter Use - FLO-DYNAMICS TS410 Quick Start Instructions

Transmission fluid x-changer
Table of Contents

Advertisement

Quick Start Instructions:
Flo-Dynamics, Inc. • 2600 Jeanwood Drive • Elkhart, IN 46514 • 800-303-5874 • www.flodynamics.com
TS410

HALTED: REVERSE HOSES

If the exchange stops and the display reads "Reverse Hoses", turn
vehicle off, switch the red and black service hoses, restart vehicle,
and press
.

HALTED: SHIFT TO NEUTRAL

If the exchange stops and the display reads "Shift to Neutral",
set the vehicle's parking brake, shift to Neutral, and press

FILTER CHANGE DUE

The machine will indicate when the canister filters need to be
replaced. Remove service panel. Use a standard filter band clamp
tool to unscrew old filters, and replace them with new filters.
Make sure new filters are on tight.
IMPORTANT: Machine must be primed after filter change.

TOTAL FILTER USE

From the Main Menu, press
Press
to display the total filter use. Press

POWER FAILURE MEMORY

If there is a power failure during a transmission fluid exchange,
the procedure can be continuted seamlessly.
Simply reconnect the battery cables, and press
The exchange will resume where it left off.

CYCLE VALVES

From the Main Menu, press
Press
to cycle the valves.
Additional Functions
twice.
to reset.
.
to proceed to the next menu.
TRANSMISSION
FLUID X-CHANGER
.
941776

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TS410 and is the answer not in the manual?

This manual is also suitable for:

Ts410lcd

Table of Contents